iTech Fone Service

Unknown

Unknown

Bypass and other If needed

Bypass Tool Set Download

How To

1. Put device into DFU mode

2. Run ssh.jar wait until it says successful

3. Open winSCP

4. Open a new connection

Host name 127.0.0.1

port 2022

login root

pass alpine

5. Press the little terminal windows in winSCP type mount.sh

6. Now we need to delete the setup.app

6a. Just go to /mnt1/var/Applications Then click right and delete setup.app

6b. If you only need to bypass activation you can now reboot and are done

NOTE : Your device will now be in recovery mode Use tinyUmbrelle to kick it out of recovery.

7. To hacktivate (Still in BETA) or unlock iCloud On the device side go to / root

8. now just copy over the contents of bypsss 3,1 3,2 3,3 over

10. reboot

11. Your device will now be in recovery mode Use tinyUmbrelle to kick it out of recovery.

Unknown

Description

ROM Phone THL T100S – ROM Android 4.2.2

ONLY MT6592 + Motherboard 1363GH

Official ROM THL T100S version: thl_T100S.159D.A2.JB9.FHD.EN.16P256.IMX135.MT6592GWP.20140219
ATTENTION This Rom is given For a Motherboard 1363GH

If your "Build number" = " thl_T100S.159D.A2.JB9.FHD………" = it's good

else not installed this rom

Gapps include – No Rooted

Language support: Multilang

Install ROM:

- Unpack FlashTools, and Click on Flash_tool.exe
- Select a the MT6592_Android_scatter_emmc.txt in ROM
- Wait file to be added into Flash Tool
- choose Option->USB Model,click USB Model
–> Choose Option->DA DownLoad All->Speed->High Speed, click High Speed
- Turn off your phone, remove the battery.

- "Press F9 (hit Download button)" OR " if upgrade ROM Firmware->Upgrade "
- and connect your phone into the computer via USB data cable.
- The process will start and a red progress bar will appear after color purple, yellow.
- And green circles display
- Finish !

- You can now safely disconnect your phone and turn it on.

Download: THL T100S Flashtools

Best Thz To http://bicgatephone.blogspot.com/

Unknown

Unknown

flash done now

Best Thz To http://www.dhakamobile.com

Unknown

Unknown

Unknown

Galaxy S4 GT-I9500 Repair IMEI "NULL/NULL"

Necessary Files
/ / Odin v3.07.zip;
/ / GT-i9500 fix_imei_null.zip;

- Open Odin
- Extract the. ZIP file, place the file in PDA [the phone has to be switched to Download Mode]
- Press START
- End! : -))

That's it, simple steps to retrieve the IMEI of S4, damaged by trying to change the imei with another model.

Note;If after these steps the imei still null/null then the problem is hardware,this tested on 2 phones with imei null,after write this file the imei back to original

http://www.mediafire.com/download/61..._imei_null_new

Best Thz GsmForum

Unknown

check jumper

if not work rehot or reball red mark ic

Unknown

Hello everyone,
Today I will show you how to fix Safari & Weather & other Apple Stock Apps crash without restoring!
First this issue most of times happen if you install the wrong Appsync in iOS 7.x like installing Appsync iOS 6 on iOS 7.x and this is wrong of course
Please note that this issue happened on iOS 6
Steps:
1. Uninstall all Appsync Cydia Apps even iOS 7.x Appsync
2. Reboot your iDevice
3. Delete these 2 files : "com.apple.mobile.installation.plist" , "com.apple.LaunchServices-045.csstore" where are located in var/mobile/library/caches
P.S: If "com.apple.LaunchServices-045.csstore" file is not available, it's OK!

4. Reboot (It is normal if some of your apps/folders are not available after the reboot, they will come back after steps)
5. Install iOS 7.x Appsync

6. Reboot

7. FINISH! Your apps should come back now!

P.S: If this didn't work at the first time, do it again, that's because of some issues with some devices

Unknown

best thz to alahad

Unknown

Platform: LG Qualcomm
Selected port: COM62
Selected model: A340
Reading info...OK
Mode: Normal
Model ID: LGA340
Firmware compiled date: FEB 11 2012
Firmware compiled time: 22:00:00
Firmware released date: Feb 13 2012
Firmware released time: 01:30:42
SW Version: LGA340-QSC6270-V10d-FEB-11-2012-ATT-US
IMEI: 013501-00-365713-9
Bluetooth address: 30:76:6F:C1:08:FC
Switching to Download mode...OK
Unlocking...
Sending loader...
Reading security area...OK
Backup saved to "A340_013501003657139_14-05-2014_10-24-55.SEC"
Analyzing security...OK
IMEI: 013501-00-365713-9
Bluetooth address: 30:76:6F:C1:08:FC
Writing security area...OK
Phone successfully unlocked!
Please, reboot the phone manually.

Unknown

[ROM] SW i-note WiFi 1.1 V2.0 SD CARD

download here

best thz to http://wintesla2003.com

Unknown

Unknown

F180 S/K/L is the Korean version of E975, LG Optimus G. Both of these models have got exactly the same hardware except that F180 also supports LTE. F180′s original official firmware is great for use in Korea but for those who are using F180 in other parts of the world, and for those who aren’t Korean, it can be a pain to use F180 with official Korean firmware at times.
LG_Optimus_G

Just like all other Korean phones, SMS is limited to 90 characters and you will not be able to send larger texts than that. Also, there is a lot of carrier specific bloatware in the official firmware. The default dialer is also a bit unpleasant to the eyes as it displays Korean characters on every dialer key. There is also the old, famous, “Call to Korea” problem.

Those who have used any Korean smartphone previously will easily understand what I am talking about. So, converting your F180 S/K/L to E975 will get rid of all of the regional problems for you. Also, as we’ll be flashing the official E975 firmware, it will be rock-solid unlike most of the custom roms and you will also be receiving automatic updates over WiFi.
Guide

Regardless of which firmware you are currently running on your F180, you will need to download and switch to the corresponding one from the list below:

F180S : F180S20B_00.kdz
F180K : F180K20B_00.kdz
F180L : F180L20H_00.kdz

Tip: You can find your phone’s model by going to ‘Settings > About > Phone identity’ in Android.
Warning: Make sure your phone’s battery is at least charged 80%. Don’t proceed otherwise as LG Optimus G comes with non-removable battery and thus you won’t be able to easily swap the battery if it dies in the middle of the process.
It is mandatory that you factory reset your phone before proceeding. For doing so, go to ‘Settings > Privacy > Factory data reset’. Please keep in mind that doing so will wipe your phone including contacts, messages, mails, applications and all the data on your phone’s internal storage. Your phone will reboot twice. Let it boot after factory reset. Once you are on the language selection screen, power off your phone
Press and hold down ‘Volume Up’ + ‘Volume Down’ and while inserting USB cable in to the phone. This will get you to S/W download mode on LG F180.
Now you need to flash the firmware you downloaded earlier. Please refer to the guide here:
How to: Download and Install KDZ LG firmware – All Android models
Once the KDZ firmware is successfully flashed, your phone will reboot automatically. Once it fully boots up, go through the setup procedure and again factory reset it as you already did once.
Once you are on the language selection screen, power off your phone
Once again, put your phone in download mode

For converting your phone to E975, we’ll be flashing this E975 Hong Kong KDZ:

E97510C_00.kdz

Follow the same procedure for flashing KDZ as you did earlier.
Once the KDZ flash is successful, go through the set-up procedure. Now go to ‘Settings > Storage’ and make sure your internal storage is being listed there. If it shows “0.00 GB” there, don’t panic. Power off your phone. Once completely off, press and hold down ‘Volume Down’ + ‘Power’ buttons until the phone displays a hard reset screen. Release ‘Volume Down’ and press ‘Power’ twice for resetting your phone.
Your phone will reboot once again and your phone’s internal storage will be back to normal.
Now you need to root your phone. Please refer to our LG Optimus G universal rooting guide here:
Universal root for LG Optimus G – Any firmware
Once you are done with rooting process, make sure you reboot your phone at least once if it doesn’t reboot automatically.
Now we will be flashing LG F180 baseband. Download your corresponding baseband backup from the list below:

F180S Baseband
F180K Baseband
F180L Baseband

Unzip the downloaded archive and you will find a batch file named ‘modem-flash’ inside it. Make sure ‘USB Debugging’ is enabled on your phone and your phone is in ‘Charge only’ mode while connected to the PC. Run the ‘modem-flash’ batch file.
Keep an eye on your phone screen as you will need to tap the grant permission button on SuperSU pop-up. If you miss the pop-up as it expires after 10 sec, run ‘modem-flash’ batch file again.
Once the baseband has been flashed successfully, reboot your phone
Congratulations! You have just converted LG F180 to LG E975.

Unknown

Selected model: T999
Selected port: COM54 SAMSUNG Mobile USB Serial Port
Selected port speed: 115200
Reading phone info...
Build: M8960A-AAAANAZM-1.0.443052
Reading security... OK
Searching server... OK
NET lock: 04269572
Sub lock: 00000000
SP lock: 00000000
For check lock status: *#7465625#
Done with Samsung Tool v.17.2

Unknown

Unknown

Press & hold volume up + home button
-keep pressing these two buttons + press power button for 2-3seconds
-release only power button,but keep pressing volume up + home buttons

Unknown

Unknown

Unknown

Step 1: Download Redsn0w 0.9.15b3 (Redsn0w 0.9.15 beta 3) from this link and save the application in a folder named “Redsn0w” on your desktop.

Step 2: Download iOS 6.0 firmware file (yes, the trick is to point Redsn0w to the iOS 6.0 firmware file and NOT iOS 6.1.6 firmware file) for your iOS device from the links mentioned below:

Step 3: Click on Extras button.

Step 4: Then click on the Select IPSW button. Navigate and select the firmware file download in Step 2. It should successfully identify it and inform you that it will be used in the rest of the session.

Step 5: Go back to Redsn0w’s main page and click on the Jailbreak button.

Step 6: Redsn0w will now start preparing the jailbreak data.

Step 7: You will now be prompted to select the jailbreak options. Make sure Cydia is selected and click on the Next button to continue. You can also select Enable battery percentage option.

Step 8: You will now be prompted to put your iOS device into the DFU mode. Turn off your device, however keep it plugged in to the computer.

Step 9: Click on the Next button. Redsn0w will take you through the necessary steps:

(a) Hold the Power button on your iOS device down for 3 seconds:

(b) Now simultaneously hold the Home button and keep the two buttons pressed for 10 seconds:

(c) Now release the Power button while keeping the Home button pressed until Redsn0w detects the device:

Note: Check this tutorial if you’re having trouble putting your device in DFU mode.

Step 10: Your iOS device should reboot now. Please remember to release the Home button.

Step 11: Your iOS device will reboot again and Redsn0w will now begin uploading the new RAM disk and kernel.

Step 12: You will be notified once the jailbreaking process is complete. Click on the Quit button to exit the application.

Step 13: The rest of the process will take place on your iOS device, wait for it to complete. Your iOS device will reboot once again (which could take approximately 5 minutes). You will now see the Home screen on your iOS device, but Cydia would still be missing, that’s because you still need to tether boot your iOS device using Redsn0w. So follow the steps mentioned below.

Boot tethered:

Step 14: Launch Redsn0w again.

Step 15: Click on Extras button.

Step 16: Then click on the Select IPSW button. Navigate and select the firmware file downloaded in Step 2.

Step 17: Then click on the Just Boot button.

Step 18: You will now be prompted to plug your iOS device to the computer and switch it OFF again. Follow the instructions and click on the Next button to move to the next screen:

Step 19: You will now need to put your iOS device into the DFU mode. Redsn0w will take you through the necessary steps:

(a) Hold the Power button on your iOS device down for 3 seconds:

(b) Now simultaneously hold the Home button and keep the two buttons pressed for 10 seconds:

(c) Now release the Power button while keeping the Home button pressed until Redsn0w detects the device:

Step 20: Redsn0w will recognize the iOS device in DFU mode and apply the limerain exploit (remember to release the Home button). Your iOS device will reboot and a pineapple logo will appear, indicating a tethered boot.

Step 21: Wait for the process to complete, once it is complete, you should see the Lock screen on your iOS device.

Your iPhone or iPod touch has now been successfully jailbroken and you should see Cydia on the Home screen. If you don’t find it on the Home screen, please don’t panic, search for it using Spotlight. The jailbreak is currently a “tethered” jailbreak,

Convert Tethered Jailbreak to Untethered Jailbreak using P0sixspwn:

Step 22: Launch Cydia. Since you’re launching Cydia for the first time, you may be prompted to do an essential upgrade. Please go ahead and do it, and then relaunch Cydia again.

Step 23: Tap on the Search tab, and search for p0sixspwn.

Step 24: Tap on p0sixspwn from the search results, tap on Install, followed by the Confirm button.

Step 25: Tap on Return to Cydia when prompted.

That’s it, your iOS device has now been successfully (untethered) jailbroken.

Troubleshooting Tips:

1. Can’t find Cydia:

If you can’t find Cydia on the home screen then double check you have tethered boot your device. Please ensure you’ve followed steps 14 to 21.

2. Unsupported IPSW:

If you get an error message informing you that the IPSW is not supported by this version of Redsn0w, then it means you’ve downloaded iOS 6.1.3 firmware file in step 2 instead of iOS 6.0 firmware file. Please download iOS 6.0 firmware file to jailbreak your iOS device running on iOS 6.1.3.

3. Cydia closes immediately:

If Cydia closes immediately when you try to launch it, it means that you haven’t installed p0sixspwn package from Cydia. Follow steps 22-24 mentioned above to solve this issue.

Unknown

Unknown

VolcanoBox will read Files like this

You have to put files like this in ResearchDownload And Click on PACKET
It will ask you "Do Packet Operation right now?"

Click on Yes

After Write Product Version

Give Saving Path

Your File is PAC File is READY

ResearchDownload_VER_2.9.7017

ResearchDownload_VER_2.9.7017.rar

iTech Fone Service

Wednesday, September 17, 2014

iOS 8 Download......

Saturday, August 16, 2014

How To Bypass iPhone4

Bypass and other If needed

Thursday, July 31, 2014

How To Update Official ROM THL T100S

Monday, June 30, 2014

Download iOS 7.1.2

Wednesday, May 21, 2014

How To Unlock Lumia 800

Tuesday, May 20, 2014

A897 Unlock By Z3X

Friday, May 16, 2014

Samsung M250S SenSor Not Work Solution

Thursday, May 15, 2014

Galaxy S4 GT-I9500 Repair IMEI "NULL/NULL"

SamSung M240S Insert Sim Solutoin

Wednesday, May 14, 2014

Fix Safari Problem After Jailbreak ios7

Nokia 108 Pinout

Tuesday, May 13, 2014

Unlock LG A340 By Octopus

SW i-note WiFi 1.1 V2.0 SD CARD

Power Ways M110S

Convert F180 S/K/L to E975 – LG Optimus G

Samsung T999L Unlock By Z3x

Friday, May 9, 2014

Nokia 110 USB Pinout

Thursday, May 8, 2014

Samsung I9003 Hard Reset

Samsung I9003 Dead boot Repair Done by Easy-Jtag

Samsung Galaxy S M110S Audio IC

Saturday, April 26, 2014

How to Jailbreak iOS 6.1.6 Using Redsn0w and P0sixspwn

Download iOS 7.1.1 Here

Friday, April 25, 2014

How to make volcano read spd android flash file to pac file from